51MrLSc4udL.jpg

Aukru 5V 3A Switch Power Supply with Clear Case Cooling Fan Cooler Heatsink Kit for Raspberry Pi 3 Model B/ B+/ Pi 2 Model B and B +

12.99£

buy now

Produktbeskrivning



buy now

£12.99



Aukru pi set – 5v 3a switching charger heatsink fan for Raspberry pi clear case

Case:
– Perfect protection for the Raspberry Pi 3/3 B+
– Clear transparent design on two-piece injection molded ABS housing, it is easy to use You just need to click together, after you fix your pi board on it firmly
– All major ports are fully accessible

Power supply:
– On / Off switch to restart or reboot your pi
– Input: AC 100-240V 50/60Hz 0.3A
– Output: DC 5V 3A (3000mA)
– Cable length: approx.150cm
– Color: Black

Heatsink:
– Material: 2x aluminum heatsink(1 large – green & 1 small – siliver);1x copper heatsink
– With high-quality thermal pad for easy Stickers
– Perfect for 24-hour operation or overclocks

Fan:
cooling fan – Mini 3x3cm DC 5v 0.2A fan give your Raspberry Pi CPU excellent cooling and ventilation with our easily attachable Pi Fan. This fan will replace the hot air in the case with fresh cool air keeping your temperatures lower.

Case installation steps:
1. Remove the TF card;
2. Remove the paper behind the heatsink,and then put 2 aluminum heatsink (green and silver) on the top, the copper heat sink under the bottom of the raspberry pi;
3. Please put the pi module tilt, when the hdmi port(micro usb port) aligned with the corresponding hole, the module can be placed in a case, such as the Step diagram Nr.3;
4. Check that all ports are aligned, tighten 3 short screws, such as the Step diagram Nr.4;
5. After fixed the fan with 4 short screws, connect to the 2pin connector(Note the connected place of the red and black connector);
6. Put the shell together, tighten the longest screw on the back;
7. Install the TF crad;
8. Installation step is complete.

Package includes:
1 * Clear Housing Case
1 * 5V 3A Charger
1 * Cooling Fan
3 * Heat Sinks kit
1 * Screw Driver
1 * Tool Accessories(Screws+Rubbery feet)
Aukru kit for raspberry pi 5V 3000A power supply with Switch + housing case + cooling fan + cooler heatsink perfect for raspberry pie 3/3 B+
Raspberry Pi 3 Transparent case use strengthened plastic – That is 2 Piece Injection Moulded and Snaps Together Holding Your Raspberry 2 & 3 Firmly in Place with Four Metal Screws
Raspberry Pi 3 Micro usb charger with turn on/off swtich,so it is very convenient No need to pull the cable to restart or reboot your PI, just press the button to turn your Pi on and off
Raspberry Pi 3 Small Cooling Fan could cool the pi module temperature. Heatsinks cooling your raspberry pi. there is stickness on the back of the heatsinks
Raspberry Pi 3 Install Warning:when install, put the pi module tilt, set up the hdmi port/micro usb port aligned with the corresponding hole, like the 3rd step of the last photo

Recensioner

Det finns inga produktrecensioner än.

Bli först med att recensera “Aukru 5V 3A Switch Power Supply with Clear Case Cooling Fan Cooler Heatsink Kit for Raspberry Pi 3 Model B/ B+/ Pi 2 Model B and B +”

E-postadressen publiceras inte. Obligatoriska fält är märkta *